EasyManua.ls Logo

COBIA 301 CC - Seating; Leaning Post; 301 Aft Seating

Default Icon
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27
Maverick Boat Group
3207 Industrial 29th St. • Fort Pierce, Florida 34946
(772)-465-0631 cobiaboats.com
12-Volt Accessory Plug
The 301 CC comes standard with two 12-volt, 25-amp
accessory plugs located inside the glove box on the
starboard side. Cell phones, media devices, spotlights or
any kind of electronic accessory can be charged while
remaining in a dry and secure area. If the plug is not
providing power, check the appropriate breaker on the
main breaker panel located inside the console.
Seating
Leaning Post
The Leaning Post for the 301 CC is home to the
double bolstered helm seats that lock into the
seated position or flip down independently for the
boater’s preference. This leaning post also carries
two insulated coolers with insulated lids. The
cooler lids come equipped with gas shocks for ease
of lifting into the open position and keeping them
open as long as needed. The back of the leaning
post houses the tackle station with independent
drawers for storing loose items and tackle trays.
301 Aft Seating
To deploy the standard aft seat, grab the black handles and pull out and down. Once the
seat begins to swing open push on the topside of the cushion straight down until the seat
is fully horizontal and locks in place. To stow the seat, repeat the procedure in reverse by
lifting from the base and slightly pulling out at the same time. Once free of the hinge
catches, the seat will begin to close. At this point, push the seat up until it’s firmly
against the back wall. When the seat is fully closed the cushion should be flush against
the back wall with the seat securely positioned in the intended recess.
To remove the backrest, simply pull up until its arms are clear of the rod holders. The
arms are designed to swivel to aid in making the assembly as small as possible for easy
stowage. When putting the backrest back on make sure that its arms are fully seated in
the bottom of the rod holders before use. Refer to page 47 for cushion care instructions.
Glove Box
Tackle Station and Coolers

Related product manuals