Cobra CR6 User Manual

20
Replacement Parts List
When ordering spare parts, please quote the part number and the description as listed below. If the part
required is not listed below, request the part by description and quote model number and serial number
which is shown on the rating plate.
Open Burners
230014 Pot Stand.
230088 Pot Stand Support.
230631 Front Burner Assy.
230632 Rear Burner Assy.
230288 Burner Cap.
230637 Gasket Burner Assy.
037210 Injector (Nat. Gas) Ø 2.10 mm (Non-UK).
037130 Injector (LP Gas [Propane]) Ø 1.30 mm (Non-UK).
037190 Injector (Nat. Gas [G20]) Ø 1.90 mm (UK Only).
037120 Injector (Propane [G31]) Ø 1.20 mm (UK Only).
018680 Gas Control Pintossi 20N (Standard Burners Only).
231560 Gas Control Pintossi 20S (Flame Failure '-F' Models Only).
019428 Thermocouple - (320 mm).
230671 Thermocouple - (500 mm).
230606 Knob - Open Burner.
Griddle
014105 Griddle Burner.
230213 Griddle Reflector Assy.
227403 Gas Control Valve.
230608 Knob - Griddle.
032200 Injector (Nat. Gas) Ø 2.00 mm.
032125 Injector (LP Gas [Propane]) Ø 1.25 mm.
019215 Pilot Burner (Fully Assembled).
026488 Pilot Injector (Nat. Gas) 0.35.
019217 Pilot Injector (LP Gas [Propane]) 0.23.
019428 Thermocouple - (320 mm).
230586 Piezo Ignitor.
228047 Piezo H.T. Lead.
230289 Grease Tray (1 per 300 mm Griddle Section).
230059 Griddle Plate 300 mm.
230084 Griddle Plate 600 mm.
230091 Griddle Plate 900 mm (CR9 Only).
Part 7 Replacement Parts List
IMPORTANT:
Only genuine qualified replacement parts should be used for the servicing and
repair of this appliance. The instructions supplied with the parts should be followed
when replacing components.
For further information and servicing instructions, contact your nearest qualified
service branch (contact details are as shown on the reverse of the front cover of this
manual).

Cobra CR6 Specifications

General

Brand	Cobra
Model	CR6
Category	Ranges
Language	English