Need help?Do you have a question about the Cobra CR6 and is the answer not in the manual?
Specifies required gas pressures and input rates for Natural Gas and LP Gas.
Outlines essential requirements for correct and safe installation of the appliance.
Mandatory safety clearances from combustible and non-combustible surfaces.
Detailed procedure for connecting the gas supply to the appliance.
How to set oven temperature and operate the main burner.
Recommendations for scheduled maintenance by qualified personnel.
General steps and precautions for converting the appliance to different gas types.
Detailed steps for converting open burners for gas type change.
Steps for converting griddle main burners and pilot burners.
Steps for converting the oven main burner injector.
Specific steps for CR6 oven main burner conversion.
Specific steps for CR9 oven main burner conversion.
Procedure for converting the oven pilot burner injector.
Instructions for converting the gas regulator for different gas types.
Checks required after gas conversion to ensure proper operation.
Detailed specifications for burner injectors and settings for different gas types.
To Next Page
General