Cobra CR6 User Manual

8
2. Improper operation is therefore almost
impossible, however bad operation practices
can reduce the life of the appliance and
produce a poor quality product. To use this
appliance correctly please read the following
sections carefully:-
 Lighting the Open Burners.
 Lighting the Open Burners. (F - Flame Failure
Option).
 Lighting the Griddle.
 Oven Pilot Ignition.
 Oven Main Burner Thermostat.
 Turning the Oven to ‘Stand-By’ Mode.
 Oven ‘Shut Down’.
Part 4 Operation
Operation Guide
1. Cobra appliances have been designed to
provide simplicity of operation and 100% safety
protection.
Description of Controls
(CR9-Gas Range 900 mm shown)
C AUTION :
 This appliance is for professional use and
is only to be used by qualified persons.
 Only qualified service persons are
to carry out installation, servicing or gas
conversion operations.
 Components having adjustments
protected (e.g. paint sealed) by the
manufacturer should not be adjusted by
the user / operator.
Griddle.
OFF Position
PILOT Burner
HIGH Flame
LOW Flame
Gas Control Knobs
Piezo Igniter
(Griddles Only)
Open Burners
OFF Position
HIGH Flame
LOW Flame
Rear Burner
Front Burner
(Indicators located
above the Gas Control
Knobs).
Oven Control
OFF Position
PILOT Burner
1-7 Thermostat Settings.
Piezo Igniter
(Ovens Only)

Cobra CR6 Specifications

General

Brand	Cobra
Model	CR6
Category	Ranges
Language	English