12
USER AND FITTING INSTRUCTIONS G100
GB
2 - INFORMATION.
The system is equipped with a self - learning function which makes it possible to simplify all operations necessary for adding or replacing radio controls
but only with the user’s consent.
For the procedure make reference to the manual at page 58 on www.cobra-at.com
2.1 - Personal PIN Code.
Each G100 system has a PIN code that is used to override the system in emergencies.
This is a PIN CODE CARD sample
(PIN CODE is factory - setted):
We advise you to stick the PIN CODE adhesive label on to the PIN CODE card (which may be found on the
rear of the control unit).
WARNING !
Don’t leave the PIN CODE CARD inside the vehicle.
www.cobra-at.com
STICK ON PIN
CODE LABEL
PERSONAL PIN CODE
5CGXXXAIA
S/N 0003 050524
PIN
CODE
1122
06DE2245D OK.pmd 09/09/2008, 10.0612
To Next Page
Loading...
Need help?
General
