MODE FUNCTIONS
Dual Watch
Dual Watch allows you to simultaneously monitor any two (2) Dual Watch
Locations:
Dual Watch Location 1 – is always the channel/privacy code displayed
before you entered Mode Functions. See “Channels” and “CTCSS
Privacy Codes” sections for further details.
Dual Watch Location 2 – will be stored in the radio. It can be edited
and/or recalled for future engagements of Dual Watch Mode.
To Program Or Edit Dual Watch Location 2 And
Engage Dual Watch Mode:
1. Press the MODE button until the Dual Watch icon and
the channel number flash on the display.
2. Choose one of the following:
a. Select or edit a channel:
1) Press the CHANNEL UP or CHANNEL DOWN
button to select a channel (1 to 8).
b. Select or edit a channel/privacy code:
1) Press the CHANNEL UP or CHANNEL DOWN
button to select a channel (1 to 8).
2) Press the MODE button to set the channel. The
English
small numbers next to the channel number will
flash on the display.
3) Press the CHANNEL UP or CHANNEL DOWN
button to select a CTCSS privacy code
(00 to 38).
3. Press the LOCK button to set Dual Watch Location 2
and engage DUAL WATCH MODE (see below for
further details).
NOTES: To terminate Dual Watch and proceed to the next available Mode
Function, press the MODE button.
While setting Dual Watch Location 2, if you do not press any buttons
for fifteen (15) seconds your radio will automatically return to
LISTENING MODE on Dual Watch Location 1.
Select Dual Watch
Mode Button
Channel Buttons
Lock Button
To Next Page
Loading...
Need help?
General
