Note
If you wish to proceed to
the next function mode,
push and release but-
ton.
Advanced Features
31
Advanced Features
30
Scan Function continued
Scan Function
Push and release button and subchannel
and scan icon will flash.
1
To scan subchannels:
Push and release either button.
Subchannel scanning will start, and stop
when an incoming transmission is detected.
2
Push and release button.
To exit the Scan Mode and return to
Operational Mode:
1
Your MicroTalk will pick it up for 10 seconds.
Within 10 seconds you can:
Push and hold button and talk.Your radio will
return to operational mode on that channel.
or...
Push and release either button to res-
can the main channel.
A
B
PMR300-UK.qx copy 6/21/99 11:45 AM Page 30
To Next Page
Loading...
Need help?
General
