Your MicroTalk will stay in the subchannel
section until you:
Push and hold button to set memory
location and stay in memory scan.
or...
Push and release button to return to
operational mode.
or...
Push and release button to proceed to
next function mode (Scan).
Advanced Features
25
Advanced Features
24
Programming Memory Locations continued
Programming
Memory
Locations
Push and release button which sets main
channel in memory and moves to subchannel
selection. The subchannel begins flashing.
The icon will remain flashing.
6
Select subchannel you wish to store (00-38) by
pushing and releasing either
button.(Use SUBCHANNEL 38 for this
example.)
7
Note
Push and hold either
button for fast channel
advance.
Note
You can push and hold the
b u t ton to begin talki n g
at any time.
Note
If you push and hold the
button,the LCD display will
cycle through the different
functions.
A
B
C
PMR300-UK.qx copy 6/21/99 11:45 AM Page 24
To Next Page
Loading...
Need help?
General
