Push and release either button until
icon appears for ringer mode.
Advanced Features
33
Advanced Features
32
Ringer/Vibrate Modes
Your Microtalk will signal you that there is an
incoming transmission with either a tone or a
vibration or both. To set for Ringer/Vibrate:
Rotate ON - OFF Volume Control clockwise.
An audible “tone”will indicate that the unit is on.
The LCD will go through a 3-second self-test and
then go to operational mode.
Ringer/Vibrate
Modes
Push and release button until icon
flashes.
2
1
3
continued
PMR300-UK.qx copy 6/21/99 11:45 AM Page 32
To Next Page
Loading...
