Cobra SC 110 - Page 8

OperationOperation
13 14
Parking Mode
Enabling Parking Mode allows your dash cam to monitor for changes in its internal G-Sensor/
accelerometer. Bumps, collisions, and break-ins can trigger the G-Sensor to save valuable footage from
the moment of impact. If leaving your vehicle o for more than 48 hours (or less if your battery is old)
please use the “Auto Surveillance Shuto” setting to set a time-limit on Motion Detection and prevent
your battery from being drained.
Note: For Parking Mode to work the dash cam needs to be connected via hardwire kit (see page 4 for
more details) or be plugged into an ‘always on’ cigarette lighter socket. You can check if your vehicle has
an ‘always on’ CLA adapter online or in the vehicles owners manual.
Surveillance Auto Shuto
If leaving your vehicle o for more than 48 hours (or less if your battery is old) please use the “Auto
Surveillance Shuto” setting to set a time-limit on Motion Detection and Parking Mode to prevent your
battery from being drained. Auto Shuto time starts after Parking Mode starts.
G-Sensor
You can use this setting to set the sensitivity of the G-Sensor from 1-3 or turn it o. Level 1 is the easiest to
activate the G-sensor. Level 3 is the setting which will only lock videos when the most severe impacts are
detected. Level 1 is recommended for most users.
Watermark (Date/Time, Speed, GPS, Driver ID Video Stamp
The watermark settings allow you to toggle having the date/time, speed, GPS coordinates, the Cobra logo
and a custom Driver ID be stamped into the bottom of all recorded video.
Driver ID Watermark
This setting allows you to associate a Driver ID with the dash cam (for example: John, Employee 12,
etc). This allows you to set the name of the driver which will be stamped on the footage as part of the
watermark.
360 Alerts
This feature enables users to view real-time and shared alerts gathered from the Drive Smarter
®
network.
You have the option to receive voice announcements through your phone or in-car display when
approaching a red light camera or speed camera location. Alternatively, you can opt to disable notications
from the unit altogether and rely solely on the Drive Smarter
®
app for guidance.
Drive Smarter
®
Services
These settings allow you to select which videos you would like auto-uploaded to the Drive Smarter
®
app
for sharing/review. You can also choose to have Incident Reports sent to your insurance provider, as well
as Mayday alerts sent to your Emergency Contact if a severe G-Sensor event is detected.
Speed Units
Choose between miles/hour or kilometers/hour as the speed unit stamped in the watermark.
Volume
Turns volume on or o.
Restore Defaults
Resets the device to factory settings. Note: restoring defaults will NOT erase data on your memory card.
Format SD Card
Allows you to format the inserted SD card. Note: This action will permanently delete all data on the card. It
is recommended to format any new card and periodically format existing cards.
About
You can use this setting to view your dash cams electronic serial number including FCC ID number and
Industry Canada number. You can also view the manufacture part number and rmware version.