SC 201
DASH CAM
QUICK START GUIDE
Connect and Power
To 12V Power Source
3
4
Camera Automatically Begins Recording
Access the dash cam’s Settings menu
Button Functions (Recording Stopped):
Takes a snapshot and stores it in the Photo Folder.
Enters the playback menu to review previous
recordings and photos.
Begins loop recording.
Takes a snapshot and stores it in the Photo Folder.
Button Functions (While Recording):
Stops loop recording. While in an Emergency
Recording you will be asked to conrm.
Blue LED indicator
lights when camera
is powered up
Red LED indicator
blinks when camera
is recording
Toggles the microphone on/off. Note that
the icon on the button indicates the action
that will be taken when the button is
pushed, not the current setting. The current
setting is shown on the status bar at the
top of the screen.
When pressed the camera saves the current
clip from being overwritten.
Scan QR Code For
Additional Languages:
To Next Page
Need help?
General
