Cobra XRS 9940

Standby Screen Icons
Your detector uses the following icons to indicate modes and functions when set:
•
City Mode
Highway Mode
Compass Battery Voltage
- -
+ -
I
• lUll .11
II • • I. •
.. '..
· ... .. .
· . ...
• • II' • •
....... II ••••• -.-
I I
~t~NW
•••••
- -
IntelliMute Above
Activation Point
IntelliMute Below
Activation Point
User and Alert Settings Sample Screen
<Ii> NOTE
For example, the sample screen indicates that IntelliMute is active,
the Compass is calibrated, your system is set to Highway mode and
your vehicle's battery voltage is charged to 13.8 volts.
•
~ Brightness Control
Your detector has a Bright display mode (for daytime driving)
and three levels of the Dim display mode: I2l\
• Dim for dusk driving. 'SrI NOTE
• Dimmer for night driving. A! the da.rk setting the
display Will show a small
• Dark to prevent all visual alerts from displaying. dot moving back and forth
. .. . toward the bottom of the
The factory s~ttlng IS DIm. ThiS level can be changed screen to indicate the unit
In programming mode (see page 10.) is turned on.
You can toggle between Bright and Dim modes
by pressing the Dim ~ button.
Dim ~ Button
Press and release (!) .....
<Ii> NOTE
When you change to Dim mode, the unit will enter
whichever dim default mode is set at the time.
Nothing Comes Close to a Cobra® 0