Cobra XRS 9940

User Settings Programming •
User Programming allows you to adjust the unit's display and sounds to
your preferences. The User Settings can be selected using the Dim ~ and
City ~ buttons by scrolling through the settings as shown in the program
flow diagram below. The User Programming Menu Guide on page 34 is a
handy reference showing the tone, visual display and voice prompts that
accompany each setting. After selecting a setting, use the Mute ..... button
to choose an option within the setting.
@NOTE
When you choose User Settings (page 11, step 2a), the system displays whichever
setting was last changed.
Setting Selection Buttons:
<!> .........•....•••....•
Dim ~ Button
Press to move to
desired setting
..
.. <!>
............. City ~ Button
Press to move to
desired setting.
.....•. <!>
Mute .... Button
Press to choose an
option within the setting.
~ .. ~ .. ~
-'~ ~ ~~
.. t ~
• Not shown •
, if Intellimute Set ,
~ ;, OFF IntelliMute 4f8
. ,. ·. Sho"wotC~~;;,: r-:~~. ',..
i, OFF. ~~ ~'"'" ,
~
~ .. ~ .. ~-'
~ English