Cobra XRS 9940

To use EasySet program mode:
1. Press the MenulSave button to reach the opening program screen.
2. Choose whether you want to change:
a. User Settings - press the Dim ~ button to enter the User Setting loop
(see page 12)
b. Alert Settings - press the City ~ button to enter the Alert Setting loop
(see page 13)
3. Press the City ~ or Dim ~ buttons to step forward or backward through
the chosen settings loop until the desired option is reached.
<ft) NOTE
Press and release the button to move one option.
4. Press the Mute .... button to toggle the option on or off or to step
through its multiple choices.
5. Repeat steps 3 and 4 to move to and set the next desired option(s).
6. Press the Menu/Save button when finished to save the settings
and exit EasySet program mode. Or, simply wait 15 seconds without
pressing any buttons.
<ft) NOTE
If power is turned off while in Program mode, option settings are saved to those
in effect before Program mode was entered.
Nothing Comes Close to a Cobra® ~