Cobra XRS 9940

EasySet Programming .
EasySet Programming gives you quick and easy access to all the settings on your
detector. It is used to program both:
• User Settings (see pages 14 and 15)
User Programming Menu Guide (see pages 34 and 35) .
•
Alert Settings (see page 20)
Alert Programming Menu Guide (see page 36).
Refer also to the Program Flow Diagrams for User Settings and Alert Settings
programming to easily navigate to the setting you want to change (see pages 12
and 13). All settings are stored in memory when the power is turned off and will be
recalled when the power is turned back on.
<4J) NOTE
You cannot enter Program mode during an alert. The unit will not detect
signals while in Program mode. During programming, if no buttons are
pressed for 15 seconds, the unit will automatically exit Program mode
and save the most recent settings.
EasySet Programming Buttons:
.............(!) City ~ Button
Press to move to
desired setting.
<!>
Mute'" Button
Press to choose an
option within the setting.
. .....
<fi .
Dim ~ Button
Press to move to
desired setting.
.....
....
(!) .
Menu/Save Button
Press to reach the
opening program screen.
~ English