CLOCK/ALARM MODE
Setting the Clock Time and Date
It is not necessary to set the clock time unless you cannot receive the
RCC synchronization signal. If you cannot receive a signal, or if you
want to set your clock manually, set the Clock Set options.
To set the Clock Set options:
Hold the CLOCK SET button for 2 seconds to enter Clock Set
mode. Press the CLOCK SET button again to cycle through the
Clock Set options.
To change an option value, press UP or DOWN. When you have
nished setting an option, press CLOCK SET to move on to the
next option.
The Clock Set options are: Language, Year, Month, Day, 12/24H, Time
Zone, RTC Hour, RTC Minute.
Clock Option Settings
Language ENG (English), GER (German), FRE (French),
SPA (Spanish), ITA (Italian).
Default: ENG
Year (YR) 2000 to 2099
Default: 2005
Month (M) 1 to 12 (January to December)
Date (D) 1 to 31
12/24H Select 12H or 24H time display
Hour Set the current clock hour
Minute Set the current clock minute
The week day will be automatically calculated once
the Year, Month, and Date are set.
To Next Page
Loading...
Need help?
General
