Use only ONE of the following connections to
avoid signal interference:
1) 2.1-Channel Audio Out
2) Coaxial Digital Audio Out*
*requires a Digital Decoding Amplifier
Component or Composite
Video Connection
Component, Composite,
or S-Video Connection
Digital Output can be output in two formats: Raw or PCM. For
more information, please see the “Setup > Audio Settings”
section of this manual or refer to your amplifier’s documentation.
Stereo (2-Channel) Audio Connection with Amplier
Digital Audio (Surround) Connection with
Digital Decoding Amplier
To Next Page
Loading...
