DVD968 | 5.1-Channel DVD Home Theater System
Quick Start Guide
Package List
DVD968 Main Unit•
Remote Control •
“AA” batteries (x 2)•
Front Speakers (x 2)•
Center Speaker (x 1)•
Surround Speakers (x 2)•
Subwoofer (x 1)•
Speaker Wire (x 5)•
AV Cable•
AM Antenna (Loop)•
FM Antenna (Wire)•
Step 1: Connecting the Speakers
If necessary, strip 3/8” (10 mm) of insulation from the ends of the speaker wire.1)
While pressing the lever, insert the wire into the hole, then release the lever. 2)
Make sure that the terminals are correctly connected to the bare wires and
not the insulation.
The speaker cable and terminal for each speaker is color-coded for your conve-3)
nience. The following guide describes which speaker goes to which terminal:
Terminal Speaker Color
SW Subwoofer Green
CEN Center Red
SR Surround Right Blue
SL Surround Left Yellow
FR Forward Right Gray
FL Forward Left White
Disconnect the power cord from the wall outlet before making any connections. Always match
colored positive (+) terminals together; and match black negative (-) terminals together. If
switched, the sound will be out of phase and will not be produced correctly. Do not connect more
than one wire to each speaker terminal; do not connect one speaker to several terminals.
To Next Page
Need help?
General
