Coby DVD968 - User Manual

Other manuals for Coby DVD968

Questions and Answers

M
markflemingAug 7, 2025
What to do if my Coby Home Theater System remote control does not function?
- B
  Brandon PriceAug 7, 2025
  If the remote control for your Coby Home Theater System isn't working, consider these possible causes: * The remote may not have batteries. Install two AAA/1.5V batteries. * The batteries might be dead. Replace them with new ones. * The remote might not be pointed correctly. Ensure there are no obstructions between the remote and the sensor on the unit's front panel. * The remote might be too far away. Keep the remote within 15 feet of the sensor. * The unit might have shut down. Turn the unit off, disconnect it from the power outlet, reconnect it, and then turn it back on.
T
Tammy HowellAug 11, 2025
Why is there no sound on my Coby DVD968 Home Theater System?
- L
  Lisa LewisAug 11, 2025
  If you're not getting any sound from your Coby Home Theater System, there might be a few reasons: * Check if the audio cables are securely connected. * Make sure the volume isn't set too low; increase the volume. * Ensure the sound isn't muted by pressing the [MUTE] button on the remote. * If the disc is in fast forward or rewind, press [PLAY/PAUSE].
M
Michael ThompsonAug 16, 2025
What to do if my Coby DVD968 Home Theater System won't play a disc?
- L
  Lisa RamosAug 16, 2025
  If your Coby Home Theater System is unable to play a disc, consider the following: * Ensure the disc is correctly loaded with the label side facing up. * The disc may be incompatible. Refer to the 'About Optical Discs' section of this manual to check compatibility. * The disc's rating might exceed the parental control settings. Adjust or reset the Parental Control settings in the System Setup menu. * The disc may be dirty. Clean the disc.
S
Sarah RodriguezAug 20, 2025
How to fix a distorted picture on my Coby DVD968 Home Theater System?
- R
  Roy RobertsAug 20, 2025
  If the picture on your Coby Home Theater System is distorted or there is no picture, here are a few things to try: * Ensure your TV is set to the correct source mode using the “Source” or “TV/Video” button. Refer to your TV's documentation for details. * Press the button repeatedly until the picture looks normal. * Check that the video cable is securely connected.
K
Keith WilliamsAug 25, 2025
What to do if the buttons on my Coby DVD968 don’t work?
- A
  Audrey WallaceAug 25, 2025
  If the buttons on your Coby Home Theater System are unresponsive, it may be due to static electricity. Try switching off and unplugging the unit, then reconnect it to the power supply and switch it back on.
D
davidgrimesAug 28, 2025
Why Coby DVD968 Home Theater System has no power?
- S
  Seth BullockAug 28, 2025
  If your Coby Home Theater System has no power, it might be because the AC power cord isn't properly connected to the power supply. Please ensure the AC power cord is securely connected.
K
kempconnorSep 1, 2025
What to do if my Coby DVD968 Home Theater System freezes when I insert a USB drive?
- D
  Douglas GilbertSep 2, 2025
  If your Coby Home Theater System freezes when you insert a USB drive or memory card, it means that the USB drive or memory card may not be compatible with this unit. If the player freezes, switch it off and unplug it from the AC power outlet. Remove the incompatible USB drive or memory card. Then, reconnect the power and switch it on again. The player will operate as normal.

Coby DVD968 Specifications

General

Type	DVD Player
Remote Control	Yes
USB Port	No
Power Supply	AC 120V, 60Hz
Audio Output	Stereo
Supported Disc Formats	DVD, CD
Playback Formats	DVD-Video, CD-DA
Playable File Types	MP3, JPEG
Playable Disk Types	DVD+R/RW, DVD-R/RW, CD-R/RW
Video Output	Composite Video