Learn the basics of the
Baha 6 Max Sound Processor
Battery door
Snap coupling
Indicator light
Control button
Microphone ports
Attachment hole
for safety line
Using your sound processor
To turn on your Baha 6 Max Sound
Processor, insert a battery and close
the battery door completely. To turn
o your sound processor, gently open
the battery door until you feel the rst
“click”.
Together with your hearing health
professional, you will have selected up
to four pre-set programs for your sound
processor, all suitable for dierent
environments. To change programs,
press and release the control button.
If enabled, audio and visual signals will
let you know which program you’ve
activated. Repeat the step until you
get conrmation you are in the desired
program.
Adjust volume via the Baha Smart App,
or directly from your compatible Apple
device or Cochlear True Wireless
TM
devices. In the user manual, you’ll nd
more information about use, visual
indicators, troubleshooting and more.
Changing batteries
Only use batteries supplied or
recommended by Cochlear. Baha 6 Max
uses a 312 size type hearing aid battery
(1.45 Volt zinc air, non-rechargeable).
To replace a battery, remove the sound
processor from your head and hold it
with front facing down. Gently open the
battery door until it’s completely open.
Remove the old battery and get a new
battery from the pack. Peel away the
sticker on the + side and insert the new
battery into the battery compartment
with the + side facing up. Gently close
the battery door.
If you have the optional tamper-
resistant battery door, you’ll need to
insert the tamper resistant tool or the tip
of a pen in the small hole on the battery
door to unlock and turn o the device.
Gently open the door. To lock and turn
on the device, gently close the battery
door until it’s completely closed.
Check out our helpful videos on
www.cochlear.com for tips on
using your new device.
98
To Next Page
Loading...
