12
3.3 Change the battery
See figure 5
1. To replace the battery, remove your
sound processor from the head and
hold the sound processor with the front
facing down.
2. Gently open the battery door until it is
completely open.
3. Remove the old battery and dispose of
it according to local regulations.
4. Remove the new battery from the
packet and peel away the sticker on the
+ side.
5. Insert the battery into the battery
compartment with the + side facing up.
6. Gently close the battery door.
NOTE
• To maximise battery life, switch off the
sound processor when it is not in use.
• Battery life decreases as soon as the
battery is exposed to air (when the
plastic strip is removed), so be sure to
only remove the plastic strip directly
prior to use.
• If a battery leaks, replace it immediately.
3.4 Tamper-resistant battery door
See figure 6
To prevent the accidental opening of the
battery door, an optional tamper-resistant
battery door is available. This is particularly
useful to prevent children, and other
recipients in need of supervision, from
accidentally accessing the battery. Contact
your hearing care professional for a tamper-
resistant battery door.
To use the tamper-resistant
battery door:
1. To unlock and turn off the device,
carefully insert the tamper resistant
tool or the tip of a pen in the small hole
on the battery door and gently open
the door.
2. To lock and turn on the device, gently
close the battery door until it is
completely closed.
To Next Page
Loading...
