23
English
NOTE
Battery performance deteriorates in
temperatures below +5°C.
8.5 Environmental protection
Your sound processor contains electronic
components subject to the Directive
2012/19/EU on waste electrical and
electronic equipment.
Help protect the environment by not
disposing of your sound processor or
batteries with your unsorted household
waste. Please recycle your device, batteries
and electronic items in according to your
local regulations.
8.6 Magnetic Resonance
Imaging (MRI)
MR
The sound processor and other
external accessories should never
be brought into a room with an
MRI machine, as damage to the sound
processor or the MRI equipment could
occur. The sound processor must be
removed before entering a room where an
MRI scanner is located.
If you are to undergo an MRI procedure,
refer to the MRI Reference Card included in
the document pack.
8.7 Electromagnetic
compatibility (EMC)
Interference may occur in the vicinity of
equipment marked with the following
symbol:
Devices such as airport metal detectors,
commercial theft detection systems, and
Radio Frequency ID (RFID) scanners may
producve strong electromagnetic fields.
Some Baha users may experience a
distorted sound sensation when passing
through or near one of these devices. If
this occurs, you should turn off the sound
processor when in the vicinity of one
of these devices. The materials used in
the sound processor may activate metal
detection systems. For this reason, you
should carry the Security Control MRI
Information Card with you at all times.
8.4 Environmental conditions
Condition Minimum Maximum
Operating temperature +5°C (41°F) +40°C (104°F)
Operating humidity 10% RH 90% RH
Operating pressure 700 hPa 1060 hPa
Transport temperature* -10°C (14°F) +55°C (131°F)
Transport humidity* 20% RH 95% RH
Storage temperature +15°C (59°F) +30°C (86°F)
Storage humidity 20% RH 90% RH
* Transport conditions require transport packaging used for sound processor.
To Next Page
Loading...
