Cochlear Baha 6 Max - Page 22

22
Typical steady state input-output characteristics
Input SPL [dB rel. 20µPa]
Output vibratory force level [dB rel. 1µN]
40
50
60
70
80
90
70
80
90
100
110
120
130
AGC min
1
AGC max
2
60
Figure 3: Input-Output characteristics for Baha 6 Max
1
Performed with reference test setting of the gain control (RTS)
according to IEC60118-9:2019 2
nd
Ed. The RTS is set to full-on-
gain minus 7 dB and expansion active.
2
Measured at 2 kHz with maximum compression ratio.
Typical steady state input-output characteristics