13
English
4. Wear
4.1 Safety line
See figure 7
The safety line is designed to reduce the
risk of dropping or losing your processor.
You can attach a safety line that clips onto
your clothing:
1. Pinch the loop on the end of the safety
line between your finger and thumb.
2. Pass the loop through the attachment
hole in the sound processor from front
to back.
3. Pass the clip through the loop and pull
the line tight. Attach the clip to your
clothing.
NOTE
Cochlear recommends connecting the
safety line when engaging in physical
activities. Children should use the safety
line at all times.
4.2 Flight mode
See figure 8
Activate flight mode in situations when you
need to deactivate radio signals (wireless
functionality), such as when boarding a
flight or other areas where radio frequency
emission is prohibited.
To activate flight mode:
1. Open and close the battery door on
your sound processor three times
(open-close, open-close, open-close)
within a 10-second period.
2. If enabled, audio and visual signals will
confirm that flight mode is activated.
See chapter 5, “Audio and visual
indicators”.
Follow these steps to
deactivate flight mode:
1. Make sure your sound processor has
been running for at least 15 seconds
before you attempt to turn off flight
mode.
2. To turn off flight mode, open and close
the battery door once on your sound
processor.
3. Let the sound processor run for
another 15 seconds or more before
turning it off to be certain that flight
mode is deactivated.
4.3 For users with two
sound processors
To make identification easier, ask your
hearing care professional to mark your
left and right sound processor with the
coloured stickers provided (red for right,
blue for left).
4.4 Wireless devices
You can use Cochlear True Wireless™
devices to enhance your listening
experience. To learn more about the
options available, ask your hearing care
professional or visit www.cochlear.com.
To Next Page
Loading...
