Cochlear True Wireless Mini Microphone 2 - Page 2

Mini Microphone Quick Guide
Pairing with your sound processor
A
You can pair up to three Cochlear wireless accessories with your
sound processor(s).
To pair a Mini Microphone in channel 2 press the pairing button
twice in step
C
. The LED will flash yellow twice every 2 seconds.
To pair a Mini Microphone in channel 3 press the pairing button 3
times in step
C
. The LED will flash yellow 3 times every 2 seconds.
E
B
Power on your Mini Microphone
Press the pairing button on the (A) Mini Microphone 2 or (B) Mini
Microphone 2+ once using the tip of a pen or similar object.
C D
The LED on top of the Mini Microphone will blink yellow once every
2 seconds for 20 seconds. While pairing mode is active (20 seconds),
switch on your sound processor.
Turn ON your sound processor(s).
It briefly flashes a blue indicator light
to tell
you pairing has been successful.
Support
For full details about the Mini Microphone 2 and Mini Microphone 2+, please refer to the User Guide that was packaged with your Mini
Microphone, and the True Wireless Accessories User Guide.
For full details about your Cochlear Sound Processor, please refer to its User Guide.
For further support and videos, visit the Cochlear website: www.cochlear.com
2
Pairing button
B.A.
Remove your sound processor(s).
Turn OFF your sound processor(s).
Status indicator (LED)
ON/OFF button
Press and hold the
ON/OFF button for
2 seconds until the LED
turns green, then release.
Turn off your sound processor(s)