45
7-2-2. Ripping Tracks
This procedure is almost the same except you are required to select the track you wish to load
(rip).
7-3. If the FreeDB is installed onto the hard disk of the X10
If you installed the FreeDB database onto the hard disk of the X10 via the supplied DVD it will
work as if the X10 is connected to network(internet). The X10 will display the CD information from
the FreeDB database installed onto the hard disk.
7-4. Display results of CD ripping and converting.
After ripping, go to the Music DB and place the cursor on the Album in question. Press the INFO
button and the results of the CD ripping and file converting process are displayed.
If you wish to check the information and the status of the conversion process for the whole of the
Music DB of the X10, go to the home screen. Place the cursor on the Music DB icon and Press the
INFO key.
8. How to use the Music DB(database)
8-1. Play music loaded(ripped) onto the X10.
【 TIP ① 】 As soon as you finish loading(ripping) a CD into MP3 format, go to Music DB and
select the loaded music and play. You can see the loaded music format is still WAV not MP3. To
understanding the reason for this please refer to the 【 TIP ③ 】 of 7 CD Loading(Ripping).
To Next Page
Loading...