AFTER SALES SUPPORT
1300 663 907 CUSTOMERCARE@WINPLUS.COM.AU MODEL: HE161192
MAINTENANCE
The maintenance of 3D Printer Touch should be conducted by skilled person only. Always unplug
the printer before doing maintenance or modications.
In order to have a smoothly working 3D Printer Touch it is important to maintain it correctly. Please
follow the safety/deterioration checks during maintenance:
• Check condition of all rubber belts
• Oil the lead screens with light machine oil (sewing machine oil)
• Check the condition of the power cable. Make sure there are no cracks in the sheath
• Check the condition of the wiring on the printer to ensure nothing is pinched of damaged
• Check the fans are operational during print
• Check the chassis is secure. Tighten any screws if there is ex in the frame
DISPOSAL OF PACKAGING
This product has been packaged to protect it against transportation damage. Unpack the
appliance and keep the original packaging carton and materials in a safe place. It will help prevent
any damage if the product needs to be transported in the future, and you can use it to store the
appliance when it is not in use.
In the event, it is to be disposed of, please recycle all packaging material where possible. Wrapping
can be a suocation hazard for babies and young children, so ensure all packaging materials are
out of their reach and disposed of safely. Observe any local regulations regarding the disposal of
packaging and dispose of it appropriately for recycling. Contact your local authorities for advice on
recycling facilities in your area.
DISPOSAL OF PRODUCT
Observe any local regulations regarding the disposal of waste products. Contact your local
authorities for advice on recycling facilities in your area.
At the end of its working life, do not throw this product out with your household rubbish. Electrical
and electronic products contain substances that can have a detrimental eect on the environment
and human health if disposed of inappropriately. Observe any local regulations regarding the
disposal of electrical consumer goods and dispose of it appropriately for recycling. Contact your
local authorities for advice on recycling facilities in your area.
To Next Page
Loading...
