Other
Using the Monitor 11
·Language: English, German, French, Janpanese, Korean, etc.
·HDR: Set the HDR Mode to AUTO / OFF / 2084(ON).
·Reset: Return all the settings to the default factory settings.
·USB: When HDMI port is used for signal transmission, select
USB1 / USB2 port as data transmission port with your laptop.
·Save Brightness: Enable / Disable saving brightness automatically
when monitor is powered on by your device with USB-C cable.
B
G R
Language English
HDR Auto
Reset
USB USB1
Save Brightness On
Other
Note:
·When Save Brightness is turned on, the monitor may not
work with your device because of not enough power supply.
Please plug in the wall charger for enough power supply for
high brightness setting.
·Brightness, Contrast and ECO settings cannot be adjusted if
HDR is turned on (set to 2084) or turned to Auto.
To Next Page
Loading...
Need help?
General
