29
5. SPECIFICATION
LINUS14/14D 5. SPECIFICATION
General
Number of output channels 4
Output stage Class D
Internal samplerate / bit-depth 96 kHz / 24 bit
Signal-to-noise ratio
(22 Hz - 20 kHz, 4 Ω - analogue input)
> 108 dB (unweighted)
> 111 dB (A-weighted)
Signal-to-noise ratio
(22 Hz - 20 kHz, 4 Ω - digital input)
> 116 dB (unweighted)
> 119 dB (A-weighted)
Frequency response
(8 Ω load with CLEAR preset)
20 Hz – 20 kHz = (+0.0 dB / -1.0 dB)
THD+N & IMD
(4 Ω load @ 1/2 output power)
20 Hz – 20 kHz = < 0.005%
Latency
(input to loudspeaker output)
Minimum 2.70 ms AES/EBU input
Minimum 2.00 ms Analogue input
Protection circuits
Inrush current limiter
Thermal limiter
Output DC
SMPS over-current
Output overload
LED indicators
Mute status
Limit
Signal
Sensor
Protection
Ethernet control active
Digital signal locked
Dante™
Power on
Ethernet connection
2 x 100 Mbps RJ45 Control
1 x 100 Mbps RJ45 Dante™
To Next Page
Loading...
