What to do if Code 3 LED X 2100 Lighting Equipment Arrowstik does not function when turned on?
If your Code 3 Lighting Equipment Arrowstik does not function when turned on, first check the plug in the rear of the control box and reconnect it if necessary. Also, check the power and ground connections, ensuring they are properly connected.
What to do if Lamp or LED module does not come on when it should in Code 3 Lighting Equipment?
If a Lamp or LED module in your Code 3 Lighting Equipment does not come on when it should, the issue may be a bad lamp or defective LED module, in which case you should replace it. Another potential cause is a defective wiring connection, which should be repaired. If the control box is damaged, return it to Code3.
How to fix LED directional or 360 module not operating when powered in Code 3 LED X 2100 Lighting Equipment?
If the LED directional or 360 module of your Code 3 Lighting Equipment is not operating when powered, it could be due to a bad power/ground connection. In this case, fix the connection. Alternatively, the module itself may be defective, requiring a replacement.
Why dimming does not operate in Code 3 LED X 2100 Lighting Equipment?
If the dimming function does not operate on your Code 3 Lighting Equipment, it could be that the white wire on the module is not connected to a +12V source. Connect the white wire to a +12V source to resolve this issue.
What to do if 360 corner module has one head out in Code 3 LED X 2100 Lighting Equipment?
If a 360 corner module on your Code 3 Lighting Equipment has one head out, first check if it is in front cut-off mode, which is not a problem. If not, check the white wire between the master and slave modules for any damage or disconnection, and fix the wire or connection. Lastly, check the power and ground of the front module and fix the power/ground connection if needed.
Why does 360 corner module have one head out in Code 3 LED X 2100?
If a 360 corner module on your Code 3 Lighting Equipment has one head out, it could be due to no power to the master module; the rear module must be powered for the front module to operate, so check the power/ground connections. Alternatively, the master module may have failed, requiring replacement of the entire 360 module.
Instructions for inspecting the light bar and preparing it for installation.
Detailed procedures for physically attaching the light bar to a vehicle.
Guidance on connecting the light bar's electrical system.
Details on configurable modules and technical parameters of the light bar.
Procedures for cleaning and servicing the light bar.
List of available replacement parts for the light bar.
Solutions for common issues encountered with the light bar.
Information regarding the product's warranty coverage and terms.
General| Brand | Code 3 |
|---|---|
| Model | LED X 2100 |
| Category | Lighting Equipment |
| Language | English |
To Next Page
