Code 3 XL5000 User Manual

INSTALLATION
&
OPERATION
MANUAL
5000 SERIES
LIGHT BAR
Read all instructions and warnings before installing and using.
INSTALLER: This manual must be delivered to the end user of this equipment.
IMPORTANT:
LIGHT BAR LIGHT BAR
LIGHT BAR LIGHT BAR
LIGHT BAR
Contents:
Introduction .............................................................2
Unpacking & Pre-Installation .......................................2
Siren Speakers.........................................................2
Mounting Light Bar ....................................................3
Wiring Instructions ....................................................3
Maintenance ............................................................4
Options ...................................................................6
Warranty .................................................................8
TM

Code 3 XL5000 Specifications

General

Brand	Code 3
Model	XL5000
Category	Lighting Equipment
Language	English

Summary

Introduction

Unpacking and Pre-Installation

Siren Speakers

Mounting the Light Bar

Mounting

Instructions for mounting the light bar using the included mounting kit.

Remounting

Guidance on reusing mounting hardware and replacing rubber feet when moving the light bar.

Wiring Instructions

Maintenance

Lens Removal

Procedure for removing lenses from Force 4™ XL 5000™ series light bars using hex screws.

Force 4 XL Light Bars Maintenance

Instructions for removing speaker cover and lenses from Force 4™ XL™ light bars.

Force 4 XLT Beacons Maintenance

Instructions for removing screws securing the lens and lifting off beacons.

Reassembly Procedures

Guidelines for reassembling components, checking gaskets, and screw tightness.

Lamp Replacement

Procedure for replacing light bulbs in the unit, identifying bulb types.

Available Options

Stingray Rotating Lamp

Describes the Sting Ray rotating lamp with three modes of operation.

Alley Lights

Details Alley Lights located at the end of the light bar for side illumination.

High Speed Rotating Lamps

Explains high speed rotating lamps that produce twice the flashes of conventional assemblies.

Stop, Turn, and Tail Lights

Describes rear-facing lights providing stop, turn, and tail signals.

D.O.T. Lights

Covers marker lights required by the Department of Transportation for truck applications.

Flasher Models and Functions

Presents a table showing different flasher models and their functions.

Warranty Information

Product Returns Process