Code 3 XCEL Series - Amplifier Power Distribution; Amplifier Power Warnings

8
WARNING
!
Connection of a 58 watt speaker to the siren amplier will cause the speaker to burn out, and will void the speaker
warranty!
WARNING
!
Any electronic device may create or be affected by electromagnetic interference. After installation of any electronic
device, operate all equipment simultaneously to insure that operation is free of interference.
WARNING
!
Utilizing non-factory specied screws and/or mounting brackets and/or the improper number of screws may result in
failure of the mounting system and severe damage to the vehicle as well as loss of warranty coverage on the equipment.
Amplier Power Distribution
The Level 1, 2, 3A and 3B outputs can supply a maximum of 15 Amps each or a combined total of 50 Amps. Each Level has a 20 Amp fuse installed
inside the Amplier. Fuses may be accessed through the panel on top of the Amplier.
The Auxiliary outputs A, B, C, D, E, and F can supply a maximum of 10 amps each or a combined total of 60A. Auxiliary outputs A, B, C, D, E, and F
have 15 amp fuses. Fuses may be accessed through the panel on top of the Amplier.