15
Siren Specications
Siren Section:
Input Voltage 10 to 16 VDC and ground - 12V units
(Note: Operation of 12V units above 15 VDC for an extended period of time may result in speaker damage.)
Operating Current 100W: 8 Amps @ 13.6V with 11-ohm load (100 Watt Speaker) - 12V units
200W: 14 Amps @ 13.6V with 5.5-ohm load (2-100 Watt Speakers) - 12V units
(NOTE: There is no 58 Watt speaker connection available.)
Standby Current Ignition On < 10mA
Ignition Off < 1mA
Cycle Rate Wail - 11 cycles/minute
Yelp - 200 cycles/minute
Voltage Output ~ 66 Vpp
Audio Section:
Audio Response 3 dB down points - 500 to 3000 Hz
1000 Hz, 0 dB reference
To Next Page
Loading...
