Code Alarm CA 5051 - Transmitter Button Functions; Replacing Remote Control Batteries

72010 Audiovox Electronics Corporation. All rights reserved.
Transmitter Button Functions
1 Way
Transmitter
Lock Unlock
Car Find /
Panic
Start Operation Method
Lock X
Press and Release
Unlock X
Press and Release
Trunk X
Push and Hold (3 Sec)
Car Finder X
Press and Release
Panic X
Push and Hold (3 Sec)
Remote Start X
Press and Release (1 or 2 times
depending on selectable option)
Remote Start
Shut Down
X
Push and Hold (3 Sec)
Run Time
Extention
X
Press and Release 4 times.
2 / 3 Hour Start X
Ignition ON/OFF, Press and Hold
Valet Button, Press Start 4 times
Daily Start Timer X X
Press Lock + Start
Replacing Remote Control Batteries
1-Way Remote Control:
The batteries (model CR2016) inside each remote control should last approximately
1 year under normal use. When the batteries become weak you will notice the
remote control range (the distance from the vehicle the remote control will work)
deteriorate and the small LED on the remote control will dim. To replace the remote
control batteries:
1. Unsnap and disassemble the halves of the remote control.
2. Remove the old batteries, observing the +/- symbols on the batteries
and replace with new CR2016 batteries.
3. Reassemble the halves of the remote control.
4. Test operation of the remote control.