Code Blue IA4100 - Initial In-Call Commands

Code Blue
•
259 Hedcor Street
•
Holland, MI 49423 USA
•
800.205.7186
•
www.codeblue.com
GU-139-Tpage 23 of 33
IA4100
Administrator Guide
Programming Commands (continued)
Miscellaneous Programming
Command Explanation Format Default
61 RFA Tone Delay from Answer 61<Delay> 5#
62 Preliminary Audio Delay 62<Delay> 9#
63 DTMF timing on 63<DTMF on># 7#
64 Pause time 64<Pause time># 7#
65 DTMF dialing volume 65<DTMF volume># 5#
67 Recording playback level 67<playback level># 5#
68 Ring count answer 68<ring>#
1Ý0#
69 Disable Backup Battery Check 69<0 or 1># 0#
NOTES: FORMAT VALUE PARAMETERS
Command 61 = RFA Tone Delay from Answer
3 - 9 = 3/10 to 9/10 second
Command 62 = Preliminary Audio Delay
0 - 9 = 0/10 to 9/10 second from RFA beep to initial 2-way audio
Command 63 = DTMF on time: 1 - 9
1 - 3 = 100 - 300 milliseconds
4 - 9 = 40 - 90 milliseconds
Command 64 = Pause time: 1 - 9
1 - 3 = 100 - 300 milliseconds
4 - 9 = 40 - 90 milliseconds
Command 65 = DTMF volume: 1 - 9
1 - 9 = -8dB - +8dB
Command 67 = Playback level: 1 - 9
1 - 9 = -8dB - +8dB
Command 68 = Ring count answer
First digit, ring count = 1 - 9
Second digit, ringing sound: if the First Digit is greater than 1, then after
H (asterisk
key) choose.
0 = NO ringing sound
1 = YES ringing sound
Command 69 = Disable Backup Battery Check
0 = NO
1 = YES
(Continued on next page)