Code 2600 Guide

2
C007995_05_CR2600_CongurationGuide
Modem Settings (for use with the Charging Station with an Embedded CodeXML® Modem or the external CodeXML® M3 Modem when paired
with a CR2600)
Modem ID and Firmware Version ....................................................................................................................................................................................5 (A2)
USB Keyboard Communication Mode - Default ..............................................................................................................................................................5 (A3)
USB HID POS (Terminal 1D 131) ....................................................................................................................................................................................5 (A4)
RS232 Communication Mode (Applicable for the CodeXML® M3 Modem Only) ...........................................................................................................5 (B1)
RS232 9600 Baud Rate (applicable for the CodeXML® M3 Modem Only) .....................................................................................................................5 (B2)
RS232 19200 Baud Rate (applicable for the CodeXML® M3 Modem Only) ...................................................................................................................5 (B3)
RS232 38400 Baud Rate (applicable for the CodeXML® M3 Modem Only) ...................................................................................................................5 (B4)
RS232 57600 Baud Rate (applicable for the CodeXML® M3 Modem Only) .................................................................................................................. 5 (C1)
RS232 115200 Baud Rate - Default (applicable for the CodeXML® M3 Modem Only) ................................................................................................. 5 (C2)
US English Keyboard Mapping - Leading 0 ................................................................................................................................................................... 5 (C3)
Keyboard Control Characters for Non Printable ASCII .................................................................................................................................................. 5 (C4)
USB Keyboard Mode No Leading 0 - Default ................................................................................................................................................................. 5 (D1)
Universal Keyboard Mapping ......................................................................................................................................................................................... 5 (D2)
French Keyboard ............................................................................................................................................................................................................ 5 (D3)
German Keyboard .......................................................................................................................................................................................................... 5 (D4)
Japanese Keyboard.........................................................................................................................................................................................................5 (E1)
Enable Preemptive Mode ................................................................................................................................................................................................5 (E1)
Disable Preemptive Mode - Default .................................................................................................................................................................................5 (E3)
Enable Reader Paging - Default............................................................................................................................................ ..........................................5 (E4)
Disable Reader Paging................................................................................................................................................................................................... 5 (F1)
CR2600 Reader Settings
Reader ID and Firmware Version ....................................................................................................................................................................................5 (F2)
Reset, Clear and Save Reader Settings
Reset Reader to RF Factory Defaults ............................................................................................................................................................................6 (A1)
Clear All Stored Data and Images and Reboot ............................................................................................................................................................. 6 (A2)
Clear all JavaScript Rules .............................................................................................................................................................................................. 6 (A3)
Save All Reader Settings ............................................................................................................................................................................................... 6 (A4)
Reader Text Settings
Reader Text Commands On ...........................................................................................................................................................................................6 (B1)
Reader Text Commands Off - Default ........................................................................................................................................................................... 6 (B2)
Communication Setting
USB Downloader Mode ...................................................................................................................................................................................................6 (B3)
Batch Mode Settings
USB Keyboard Mode (Batch Mode Only) ........................................................................................................................................................................6 (B4)
USB Virtual COM - 1 Way Mode (Batch Mode Only) ..................................................................................................................................................... 6 (C1)
Batch Mode Enable - Send and Log...............................................................................................................................................................................6 (C2)
Batch Mode Disable - Default .........................................................................................................................................................................................6 (C3)
Batch Mode Enable - Log Only.......................................................................................................................................................................................6 (C4)
Enable Alternative Operating System (Windows CE/MAC/Linux) - Batch Mode Only ................................................................................................... 6 (D2)
Disable Alternative Operating System - Batch Mode Only - Default............................................................................................................................... 6 (D3)
USB Speed - High Speed (Batch Mode only) - Default ..................................................................................................................................................6 (D4)
USB Speed - Full Speed (Batch Mode only) .................................................................................................................................................................. 6 (E1)
Image Settings
Read Both Wide and High Density Field - Default...........................................................................................................................................................6 (E2)
Table of Contents

Code 2600 Specifications

General

Operating Temperature	0°C to 50°C (32°F to 122°F)
Voltage	5 VDC ± 10%
Resolution	4 mil
Interface	USB, RS232, Keyboard Wedge
Supported Barcodes	Code 39, Code 128, UPC/EAN, Interleaved 2 of 5, Codabar, MSI
Humidity	5% to 95% (non-condensing)