Need help?Do you have a question about the Code Reader 2500 and is the answer not in the manual?
General| Brand | Code |
|---|---|
| Model | Reader 2500 |
| Category | Barcode Reader |
| Language | English |
Steps to install and charge the lithium-ion battery for the reader.
Procedure to turn the CR2500 reader on and off.
Guide to connecting the CR2500 to a computer using the USB interface.
Steps and tips for successfully reading barcodes with the CR2500.
Explanation of Standard and Additional Bluetooth Reliability Modes.
Steps to save settings for a permanent Bluetooth connection.
How to enable or disable automatic Bluetooth connection.
How to enable or disable automatic disconnection after data transmission.
Step-by-step guide to configure the CR2500 with Belkin Bluetooth Manager.
Guide to configuring the CR2500 with Toshiba Bluetooth Stack.
Guide to configuring the CR2500 with Microsoft Bluetooth Stack.
Instructions for installing the CodeXML Router Bluetooth Edition software.
Codes to set the functionality of the left trigger.
Codes to set the functionality of the right trigger.
Codes to enable or disable continuous scanning mode.
Configuration options for continuous scan mode, including sleep time and trigger delays.
Codes to set reader vibration modes and volume levels.
Codes to set the automatic power-off time for the reader.
Codes to lock or unlock reader settings to prevent unauthorized changes.
How to adjust the targeting zone tolerance for improved decoding accuracy.
How to optimize processing time by adjusting the imager's viewing area (windowing).
Codes to set prefixes to be added to scanned data.
Codes to set suffixes to be added to scanned data.
Codes to reset the reader to its factory default settings.
Important safety guidelines for operating and handling the CR2500.
Tips for cleaning and maintaining the CR2500 for optimal performance.
To Next Page
