Code 2600 - Communicating in USB Mode

8
C007995_05_CR2600_CongurationGuide
NOTE: The conguration change will take effect immediately and saved to memory.
CR2600 Conguration Guide
Beep Volume 0%
Beep On Vibrate Off Beep Off Vibrate Off
Beep On Vibrate On - Default
Beep Off Vibrate On
Beep Volume 33% Beep Volume 67% Beep Volume 100% - Default
Bluetooth Radio Out of Range
Beep and Vibrate - On
Bluetooth Radio Out of Range
Beep and Vibrate Off - Default
Bluetooth Radio Disconnect
(Reconnect via QuickConnect
Code)
Bluetooth Radio Out of
Range Beep - On
Bluetooth Radio Out of Range
Vibrate - On
Remote Management
Disable - Default
Remote Management Enable
Enable Cell Phone
Reading Enhancement
Disable Cell Phone Reading
Enhancement - Default
Aztec On - Default
Aztec Off Aztec Inverse On Aztec Inverse & Normal
Intentionally Left Blank
Intentionally Left BlankIntentionally Left Blank