Code CR950 Configuration Guide

A1 A4A2 A3
B1 B2 B3
C1 C4C2 C3
D1 D4D2 D3
E1 E4E2 E3
B4
CR950 Configuration Guide
NOTE: Configuration changes will take effect immediately and be saved to memory
Web Generated Configuration Guide
For questions regarding reader configuration contact support@codecorp.com.
6
Enable Stand Detection -
Default
Disable Stand Detection Motion Detect Off - Default
General Reading Mode
Settings
Motion Detect Always On Motion Detection in stand
Duplicate Scan Delay 0 ms
Motion Detection in stand
Duplicate Scan Delay 500 ms -
Default
Enable Cell phone reading
enhancement
Disable Cell phone reading
enhancement. - Default
Set motion detect maximum
brightness to 25%
Set motion detect maximum
brightness to 50%
Set motion detect maximum
brightness to 75%
Set motion detect maximum
brightness to 100% - Default
Disable Data Formatting -
Default
Prefix Comma
Data Formatting
(Prefix/Suffix) Settings
Prefix Space Prefix Tab (USB Keyboard Mode
Only)
Prefix Tab (RS232 Mode Only) Erase Prefix Data

Code CR950 Specifications

General

Brand	Code
Model	CR950
Category	Barcode Reader
Language	English