C001537_04_CR2 User Manual - i
Save Settings
Statement of Agency Compliance
The CR2 can be set to use targeting lasers. If the targeting lasers are
activated, do not stare into the beams. The CR2’s targeting lasers have
been rated as Class IIa Lasers by IEC 60825-1.
The CR2 has been tested by an independent electromagnetic compatibility
laboratory in accordance with the applicable specifications and instructions.
The CR2 has been tested for compliance with FCC regulations and was
found to be compliant with all applicable FCC Rules and Regulations.
IMPORTANT NOTE: To comply with FCC RF exposure compliance
requirements, this device must not be co-located or operate in conjunction
with any other antenna or transmitter.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
The CR2 has been tested for compliance to CE standards and guidelines
and was found to conform to applicable CE standards, specifically the
EMC requirements EN 55024, ESD EN 61000-4-2, Radiated RF Immunity
EN 61000-4-3, ENV 50204, EFT EN 61000-4-4, Conducted RF Immunity
EN 61000-4-6, EN 55022, Class B Radiated Emissions, and Class B
Conducted Emissions.
To Next Page
Loading...
Need help?
General
