Example:#12345678•07••
Result:The lock reverts to normal operation
Note:See Installation Instruction for REM connection.
13 Feature Restriction
The lock supports entry methods including code, card, phone and NetCode. By default, all methods are
supported but can be disabled using the program below.
Note:Access via a smartphone with the K3 Connect App is not supported in standalone applications.
#Master Code•13•User Code <0-1>•Smart Card <0-1>•NetCode <0-1>••
Example:#12345678•13•1•1•1••
Result:Code, Card and NetCode methods are all enabled.
Help:To enable a method, specify 1. To disabled a method, specify 0
14.0 Disable Keypad Illumination
Note:Keypad illumination is disabled by default.
#Master Code•14•0••
Example:#12345678•14•0••
Result:Keypad illumination is disabled.
14.1 Enable Keypad Illumination by Proximity
Keypad will illuminate when something comes in very close proximity to the keypad.
#Master Code•14•1•Start Hour <08>•End Hour <17>••
Example:#12345678•14•1•08•17••
Result:Keypad illumination by proximity is enabled from 8am - 5pm.
Note:Battery life will be reduced by enabling keypad illumination.
14.2 Enable Keypad Illumination by Button Press
Keypad will illuminate when any button is pressed.
#Master Code•14•2•Start Hour <08>•End Hour <17>••
Example:#12345678•14•2•08•17••
Result:Keypad illumination by button press is enabled from 8am - 5pm.
Note:Battery life will be reduced by enabling keypad illumination.
15.1Lock-Down
Prevent the lock from being unlocked by any method except via Master Code and Sub-Master Code:
Note: This Program is available to both the Master and Sub-Master codes.
#Master Code•15•1••
Example:#12345678•15•1••
Result:Lock-Down is enabled. Only the Master and Sub-Master Codes can be used to open the lock.
To Next Page
Loading...
