CODELOCKS CL5500 SERIES - Restore All Code Free Periods; Date & Time Settings; Update Date;Time; Update Daylight Savings Time (DST)

24/9/2561 KA-01040 · Customer Self-Service
https://support.codelocks.com/knowledgebase/article/KA-01040/en-us 7/13
Example:#12345678•05•3••
Result:Suspends all Code Free periods

05.4 Restore all Code Free periods
Note: This Program is available to both the Master and Sub-Master Codes.
#Master Code•05•4••
Example:#12345678•05•4••
Result:Restores all Code Free periods

Date & Time
10 Update the Date/Time
Update the date and time on the lock. Particularly important when Code Free and Active-Period options are
in use.
#Master Code•10•YYMMDD•HHmm••
Example:#12345678•10•160122•1422••
Result:The date has been updated to January 22nd, 2016 and the time to 14:22.

Set Daylight Savings Time
11 Update the Daylight Savings Time (DST)
#Master Code•11•Date Starts <YYMMDD>•Date Ends <YYMMDD>••
Example:#12345678•11•160327•161030••
Result:DST is set to start on March 27th, 2016 and end on October 30th, 2016.
In the majority of countries where DST operates, DST is applied at 01:00. This is the default DST time
on the lock but can be changed by using the program below.

12Set newDaylight Saving Time
#Master Code•12•Time <HH>••
Example:#12345678•12•02••
Result:DST will now be applied at 02:00

Clients (Users)

Add a New Client