Codex G500 Series - Connecting to the Host Computer

11
B1
USB PORT
B2
USB PORT
A1
POWER JACK
A2
PLUG
2 Printer Setup
G500 Series
Connecting The Printer To The Host Computer

Please make sure that the printer is switched off.

Connect the power cord to the AC adapter and connect the adapter to the printer.

Connect the USB / parallel cable to the printer and host computer.

Switch on the printer. The LED indicator should now lights up.
2-7
B1
USB PORT
A1
POWER SLOT
A2
THE SOCKET OF THE WALL
B2
USB PORT
Printer Setup
011