27
5 Accessories
G500 Series
Installing The Label Dispenser
The Overview Of The Label Dispenser
Preparation Steps
Please complete the preparation steps before installing the label dispenser.
5-1
Accessories
027
SCREWS
CONNECT CABLE OF LABEL DISPENSER
PAPER SENSOR
PAPER FEED
ROLLER
LABEL DISPENSER MODULE
A label liner thickness of 0.006 mm ± 10% and a weight of 65 g/m
2
± 6% are recommended.
The label dispenser will take labels up to a max. width of 110 mm.
When using the label dispenser, set the stop position to 9 mm.
NOTICE
To Next Page
Loading...