9
Step 5: Clean the canister bodies
MONTHLY CLEANING PROCEDURE
Remove the coffee (MF04 only) and
ingredient canisters.
Pull the outlets off then clean the outside of
each canister with a damp cloth.
Clean out any remaining ingredients from the all of the
parts with a brush (open the canister outlets when cleaning
with a brush). Rinse with clean water, then dry all parts and
set the mixing system parts aside.
Replace the outlets back onto the correct
canisters, make sure they are closed or
pointing upward, and set aside.
Step 6: Clean the canister outlets
Soak all the mixing system parts and canister outlets
in a bin with warm water and cleaning agent for a
few minutes to loosen any dried ingredients.
To Next Page
Loading...
