28
Troubleshooting Remedial action
The brewing, cleaning or
descaling process cannot be
started
X
Remove the collection
container from the machine
for at least 8 seconds and
empty it.
X
Re-insert the collection con-
tainer.
X
Press the control lever down.
Troubleshooting Remedial action
No / too little coffee dis-
pensed
Water tank is empty.
X
Fill water tank and insert.
The coffee ball is defective.
X
Use a new coffee ball.
X
Push the operating lever
down as far as the stop.
The operating level is not fully
closed.
X
Push the operating lever
down as far as the stop.
The coffee machine is scaled
up.
X
Descale the machine
(page 17).
The water from the softening
system was used (extends cycle
time).
X
Monitor/adjust softening
device or use water before it
passes through the device.