Need help?Do you have a question about the Cognex DataMan 360 Series and is the answer not in the manual?
General| Model | DataMan 360 Series |
|---|---|
| Type | Fixed-mount barcode reader |
| Reading Capability | 1D and 2D barcodes |
| Lighting | Integrated LED lighting |
| Field of View | Varies by model and lens |
| Connectivity | Ethernet, RS-232, USB |
| Dimensions | Varies by model |
| Weight | Varies by model |
| IP Rating | IP65 |
Overview of the DataMan 360 series readers and their advanced features.
Information on configuring the DataMan 360 series readers using software.
Details on various accessories available for the DataMan 360 series.
Description of different lens types compatible with DataMan 360 readers.
Information on protective lens covers for DataMan 360 readers.
Details on external red LED lighting options for DataMan 360.
Specifications and details for laser aimers used with DataMan 360.
Information on high power illumination accessories for DataMan 360.
Overview of available cables for DataMan 360 series readers.
Details on power supply options for DataMan 360 readers.
Information on mounting brackets for DataMan 360 readers.
Overview of different DataMan 360 system configurations and capabilities.
Diagram and explanation of the DataMan 360 reader's physical components and indicators.
General guide for attaching different lens types to the reader.
Step-by-step instructions for installing an M12 lens with manual focus.
Instructions for installing a liquid lens module onto the reader.
Procedure for installing a 24mm liquid lens module with HPIL.
Steps for mounting a C-mount lens onto the DataMan 360 reader.
Procedure for installing an optical filter into the front cover of the reader.
Guide on using external light mounting brackets with the reader.
Methods for setting optimal focus for different lenses and reading scenarios.
Information on reading distances and field of view for various lenses.
Detailed specifications for the imager sensor and resolution.
Table listing LED types and their corresponding peak wavelengths.
Parameters for various illumination options available for the reader.
Steps to install the DataMan Setup Tool and connect the reader.
Guidance for resolving issues with Ethernet connectivity.
Information on supported industrial communication protocols.
Explanation of different trigger modes for DataMan 360 readers.
Methods for triggering the DataMan 360 reader externally.
Configuration for synchronizing multiple readers for trigger events.
Process for optimizing reader settings for best performance.
How to apply image filters to enhance acquired images.
Procedure for training the reader to recognize specific symbologies.
Using reader inputs for package detection and buffering no-read images.
Details on the 4-pin cable for external light power and strobe control.
Breakout cable for trigger and high-speed outputs with pinout.
Breakout cable for trigger and high-speed outputs with M12 connector.
15m breakout cable for trigger and high-speed outputs.
Specifications and capabilities of the reader's high-speed output ports.
Wiring diagrams for connecting high-speed outputs to PLCs or loads.
Details and pinout for the 5m RS-232 connection cable.
Specifications for the Ethernet M12 to RJ45 network cable.
Explanation of the opto-isolated acquisition trigger input.
Guide for connecting an encoder to the reader, including wire coding.
Instructions for connecting multiple readers in a daisy-chain configuration.
Instructions for cleaning the exterior of the reader housing.
Procedure for cleaning the reader's lens cover without scratching.
Important safety precautions and warnings for operating the device.
Details on regulatory compliance and standards met by the device.
Safety information regarding the Class 2 laser product.
Safety information regarding the LED illuminations.
Information and directives relevant to users in the European Community.
QR codes for resetting the scanner to factory defaults or rebooting.
To Next Page
