Need help?Do you have a question about the Cognex DataMan 50 and is the answer not in the manual?
Procedures for maintaining and servicing DataMan readers.
Steps to set the focus position for the DataMan 50 reader.
Steps to set the focus position for the DataMan 60 reader.
Steps to set the focus position for the DataMan 70 reader.
Procedures for setting focus, changing lenses, and installing filters.
Procedures for installing and changing lenses for the DataMan 280.
Procedures for replacing lenses and installing modules.
Pinouts and wiring for I/O, USB, and RS-232 for DataMan 50/60.
Pinouts for DataMan 70 adapter cables and serial adapter.
USB, RS-232, and I/O module wiring for DataMan 150.
Discrete I/O, Ethernet, and high-speed outputs for DataMan 260.
Ethernet, I/O, and high-speed outputs for DataMan 280.
Cable pinouts, light control, power, and output wiring.
Discrete I/O, RS-232, light control, and power for DataMan 503.
Description of available trigger modes for DataMan readers.
Training DataMan readers to improve performance by learning code parameters.
Configuring multiple readers for group triggering and synchronized acquisition.
Setting up synchronized acquisition for DataMan 300, 360, 370, 470, and 503.
Procedures for maintaining and servicing DataMan readers.
Steps to set the focus position for the DataMan 50 reader.
Steps to set the focus position for the DataMan 60 reader.
Steps to set the focus position for the DataMan 70 reader.
Procedures for setting focus, changing lenses, and installing filters.
Procedures for installing and changing lenses for the DataMan 280.
Procedures for replacing lenses and installing modules.
Pinouts and wiring for I/O, USB, and RS-232 for DataMan 50/60.
Pinouts for DataMan 70 adapter cables and serial adapter.
USB, RS-232, and I/O module wiring for DataMan 150.
Discrete I/O, Ethernet, and high-speed outputs for DataMan 260.
Ethernet, I/O, and high-speed outputs for DataMan 280.
Cable pinouts, light control, power, and output wiring.
Discrete I/O, RS-232, light control, and power for DataMan 503.
Description of available trigger modes for DataMan readers.
Training DataMan readers to improve performance by learning code parameters.
Configuring multiple readers for group triggering and synchronized acquisition.
Setting up synchronized acquisition for DataMan 300, 360, 370, 470, and 503.
General| Model | DataMan 50 |
|---|---|
| Image Sensor | CMOS |
| Type | Handheld |
| Reading Capability | 1D and 2D barcodes |
| Connectivity | USB, RS-232 |
| Lighting | LED illumination |
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
| Aiming | Laser |
| Field of View | 30° |
| Working Distance | 50 mm to 200 mm (with 6.2 mm lens) |
| Power Supply | 5V DC |
To Next Page
