If the reader is configured as an HID device and you want to return to USB serial, scan the USB serial connection code:
Note: The DataMan PC software must be installed for this connection type.
DataMan 150 RS-232 Connections
You can connect the DataMan 150 reader to a PC or other device over a standard RS-232 serial connection.
Note: You must supply external power to use this connection type.
You can make a connection in the following ways:
Connect directly to the PC: Connect to the PC through a basic I/O module:
DataMan 150 Wiring the Basic I/O Module
97
Electrical Information
To Next Page
Loading...
