DS1050 Sensor Specifications
Refer to the following sections for DS1050 hardware and laser specifications.
Hardware Specifications
Weight 700 g
Operating
Temperature
0 ºC to 50 ºC (32 ºF to 122 ºF)
Storage
Temperature
-10 ºC to 80 ºC (14 ºF to 176 ºF)
Maximum
Humidity
10% to 85%, non-condensing (Operating and Storage)
Environmental IP65 (with Cognex recommended IP65 Ethernet and Power and I/O cables)
Power Supply
Requirements
Voltage: +24 VDC +/- 10%
Current: 500 mA max
Trigger
Input voltage limits: Trig+ - Trig - = - 24VDC to +24VDC
Input ON: > 10 VDC (> 6 mA)
Input OFF: < 2 VDC (< 1.5 mA)
Encoder Input
Specification
Differential: A+/B+: 5-24V (50 kHz max) A-/B-: Inverted (A+/B+)
Single Ended: A+/B+: 5-24V (50 kHz max) A-/B-: VDC = ½ (A+/B+)
Working Distance 87 to 163 mm
Ethernet
l Gigabit Ethernet interface
l Integrated link and traffic LEDs
l Standard M12-8 female connector
Shock 50 G’s Half-Sine with a pulse of 11 milliseconds duration. Test conducted while instrumented in a
shipping package dropped from a maximum of 36 inches
Vibration 8 G’s RMS Random Between 10-500 Hz for a duration of 30 minutes.
Certification
Altitude rating 2 km / 6561 ft
Laser Specifications
This laser product is designated as Class 2M.
Wavelength 658 nm
Laser Power for Classification <5 mW
Laser Maximum Total Power <40 mW
Minimum Divergence
vertical:<1.5 mrad
horizontal:32 degrees
Laser Line Thickness (FWHM) <0.4 mm
Sensor Size 1024x768 pixels
XResolution
Top 0.059 mm
Bottom 0.090 mm
14
DS1050 Sensor Specifications
To Next Page
Loading...
Need help?
General
